...Jack it up and spin the wheel. Listen for noise. If it has lots of miles or possibly been driven in high water at some point the bearing could need to be replaced. You should get it fixed and don't ...
...the bulbs and found both connectors to the bulbs to be burned badly..blue wire on both sides. High beams work fine. Could be coincidence but tail light assembly on passenger side had to be ...
...but only when first start it after drive it for maybe 20 minutes its fine then other day going on high way came to a hill and i started to slow down big time but was hitting the gas then it started ...
...warm. The temp sensor on dash now reads less than normal since changing thermostat; it used to be high. Engine is definately hot though and coolant is not ciculating. I say hot to the point of
Vibration I am having a few issues with my 1992 GMC Sierra 3/4 ton. It is a 3/4 ton extended cab short box with a 350 engine and 2 piece drive shaft. Not sure what type of transmission but it is an ...
93 Geo Prizm Fails Both Low/High Speed TX Emission Test This is a 93 Geo Prizm w/180k miles. I replaced the catalytic converter, tune up, cleaned injectors, and the car cannot pass. The car is driven ...
...reverse. Sometimes a bolt or a spark plug could be wedged between the motor and the frame making a high squeaking noise when the engine shifts
824 questions posted
Usually answered in minutes!
721 Questions
426 Questions
169 Questions
128 Questions
17 Questions