1993 Blazer. I ended up having to replace the ignition switch because the tumblers were shot and it would no longer let me turn the vehicle to the off position. If you have a heavy key ring that could
...the wiring system. It is a 1993 Chevy S-10 Blazer. without turning the key to start, either solinoid is hung up or the ignition switch went bad. let me know if i can help you anyway that i can
Question about GMC Envoy
blazer, i put it in park, with my foot on the brake. then i turn the key off and remove it from the ignition. the motor is still running. when i take my foot off of the brake the motor kills and stays
...blazer. Every so often it doesnt want to start. doesnt crank or anything. Then i turn the key on and off a couple times then it starts. Also when its running and i turn the heat or radio on it boggs ...
...1993 chevy s10 blazer, I can not get it to start, I have replaced the cpi, ignition pick up coil, distribtuor cap, rotor, fuel pump,fuel filter, tpi sensor,spark plugs,what else do I have to check,? ...
...blazer won't shift into 4x4. When you turn ignition on the 4x4 lights don't come on and when you press the 4x4 hi the 4x4 lo lights and also when you press 4x4 lo it lights but nothings happens. I ...
1993 Chevy S-10 blazer turns over but won't start I have a 1993 Chevy S-10 blazer and it stopped while I was driving. It will turn over but will not start. I replaced the fuel pump, plugs and wires, ...
...1993 chevy suburban won't start battery is good and starter is good I got a new ignition switch I got the old one out and I'm having trouble getting the rod to fit in the new one need some help in ...
spider fuel inject no power make sure you are getting a signal from the dist. also check that ther is power coming from the ignition switch as you crank.
What position does ignition gear set to install ignition switch Somewhere around RUN....
2,182 questions posted
Usually answered in minutes!
2,225 Questions
1,368 Questions
593 Questions
540 Questions
159 Questions