2001 GMC Sierra Crew Cab "car lurches put reverse" Questions

...put it in reverse as i started to back up my truck started to sputter and lurch then it just died. I started the truck up again and it started just fine. I put the truck in drive and when i put my ...

...lurches the reverse on my 1989 corvette just stopped working, when I shift into reverse it rolls forward and when I shift into drive it does nothing for a second and then gives a very sudden lurch ...

...too. As for the transmission it could be your spider gears , there weak in the 700R4 and other you lose your reverse first with had lurchs when put in to drive. Sorry for the bad news, good ...

...put it in drive or reverse it lurches when the gas is applies, but the wheels will not turn. I tried to engage the parking brake when I put it back in Park and it would only engage halfway. Sounds ...

Reverse, there is quite a loud clicking sound (may be normal) Whenever I accelerate from a stop the car will hop in first gear before changing up. This is worse when the engine is cold Any ideas would

...motor vibrates Type of vehicle?Auto?Standard?Put emergency brake on and have someone view the engine whilst shifting into reverse...if engine lurches back or forth, it is most likely an engine ...

...car barely moved abs light on put in reverse it lurched then the abs light went off now it's ok what hae need Nothing once the light went off it's ok now Check for metallic contamination on the ABS ...

...when in idle,idling high, and lurching forward or reverse when I put into gear after starting. any suggestions? Sounds like you have a bad sensor, Check the oxygen sensor first, the the MAF ...

...reverse, however, it lurch backwards. I then parked the truck and have since been racking my brain about what went wrong and what to do. Maybe I didn't put enough tranny fluid in? Please help! Sounds ...

...put it in first gear and turn the engine over careful car will lurch forward if it engages instantly depress clutch to stop forward movement, select neutral restart motor make sure you have plenty of ...