Brake lights don't work. Fuse is good, bulb is good, but brakes still won't come on. GMC Sonoma 1994. please check your brake light switch located near the brake pedal. it could be faulty. tnx 4 using
...brake light switch is not hooked or adjusted right.its a very easy Fix.Get a Helper to watch the rear lights while your adjusting.If does'nt work after adjusting or reconnecting it .Go get another ...
brake lights dont work untill i turn the lights on, then stay on When I apply the brake pedal the 3rd brake light comes on, but no tail lights. When I turn the lights on, the tail lights turn on but ...
day time runing light dont work change out the module still not working check all fuse Check the parking brake light switch / by the pedal.
Question about GMC Yukon
...brake lights and turning lights dont work i have check the brake light switch,bulbs and when i check the fuse it was bad so i change it and it pop too so i anyone have any ideas please let me know bc ...
...and thank you! Your parking light and turn signal/brake lights are actually separate but in the same bulb. 2 elements in one bulb. Replace bulb with the same type and that should solve your
...lights dont work checked the fuse but not blown dash indacator shows it is on but are not please help Make sure Parking brakes are fully released and then check the diode under the dash, drivers side ...
...dont know if this had anything to do with the 4+4 not working. I was working last year have not use it since then . the light in on but it does not switch from 2 wheel to 4 . If the transfer case is ...
...probably bad. Sometimes you can wiggle them and get the turn signals to work. The other thing that is common with a bad switch is the brake lights don't work except for the third (middle) brake
217 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions