Question about GMC Yukon
...dimer than the left at all times what do i do i dont think its the bulbs because i switched them with the ones from the left side and it still does it I have the answer and its a common problem you ...
test if the light is ok by turning the dimer for the dash light all the way up until it clicks, if the light come on, then this mean the fuse the circuit and the bulb are ok. also try by opening other
...dimer switch nothing happeneds, when putting power to the back of dash lights, lights will come on with tester DId you just install something, if you install something like a radio, you probably or ...
dimer switch/ lost ground for high beams / or is it possible both of your high beams are bad? have you used a test light at the light to verify no power and good ground? I just the spent the whole day
...dimer switch on the stearing column on bright for the entire trip home, somewhere along the way I can kick the box and they will come back on and hopefully stay on. check for power at low beam head ...
...wats wrong they may have serpent fuse dimer switch maybe bad or both low bulbs my have brunt out check with cheap test light also make sure they have good grownd.naro it dowen and ask again if need ...
...lights 2001 accent i have no dash lights no heater lights no shift light i change the diode fuses dimer switches and even fallowed wires to back tail light everything looks fine but took the diode ...
...dimer switch Probably a problem with the LCM - lighting control module . The main light switch is a input to the (LCM) . Here is free wiring diagrams http://www.bbbind.com/free_tsb.html Enter your ...
373 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions