remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.
...door panel will have to be removed to gain access to the latch rods to open the door and then replace the handle. the only bad part of that is the inner door panels normally do not come off in once ...
...remove the interior door panel,put the glass in the full up position,remove the rod attached to the handle(small plastic clip),using a 10mm socket and extension with ratchet remove the 2 bolts and ...
...soloma truck 2 wheeldrive 4 cylinder? I cant find the fuxe box open the drivers door and look on the left dash panel (that meets the door) there should be a panel there to remove to see the fuse
...remove the inside door panel on a '98 GMC Sonoma? There is a special tool that you can buy to remove the snapp caps on the door they are lined all the way around the pannel and you need to pull them ...
How do you repair a door a door latch on the right side of my 1991 GMC Sonoma? It is standard not electric remove door panel and then bolt from latch and links /cable from latch,
...latch 2003 Sonoma TAKE DOOR PANEL OFF.... USE A 10 MILIMETER LONG SOCKET WITH LONG EXTENSION. TO REMOVE THE HANDLE FROM THE INSIDE OF DOOR.YOU WILL HAVE TO DICONNECT AND RODS THAT ARE ATTACHED TO
...door panel to repalce speakers? Under the arm rest is a couple screws. Remove them. You may need to remove the electric window switch as well. If you have the type of handle I think you do there is a ...
...door panel (its a funny looking screwdriver/pry tool) and remove and trim screws to check and it should only take you about 10-15 minutes. the latch or lever could also be jammed. either way its an ...
377 questions posted
Usually answered in minutes!
403 Questions
359 Questions
270 Questions
269 Questions
241 Questions