1996 GMC Yukon "jasper replacement engines" Questions

...2000 n 3000 which is where it all ways rides. I've had every sensor changed along with a new jasper motor. It still jerks so i took it back to the garage and we tried changing the tork ...

...to be replaced, no one knows why they are going bad; the car has 100,000 miles on it with new jasper engine; all coils on left side of engine have now been replaced. you have a bad ground issue ...

Jasper engines before and if you do that, how long the cars have been able to keep driving (just on avg.). Thanks. Hi.. Yes I have replaced Engine and Transmission. for a few car ,, From JASPER. But I

I have a 1991 K-Blazer that we rebuilt a high output jasper engine for that came out of a 1984 Caprice, it keeps fouling the plugs after only running for a short while Everything has been replaced, ...

...replacement estimates for my customers, I usually give them all the options. I will write-up an estimate based on a used engine, then I will write one based on a low-end remanufactured engine, then I ...

...12 miles or as many as 50 miles. Always on #2. Engine only has 68K on it. It is a Jasper replacement engine. Sometimes I can stop, turn it off and restart and it is fine. Could be a worn rocker arm

...transmission for a 2005 Chevy Impala that is going to vary with your location. a gm replacement is about $1700-2200 check with jasper engines and transmissions also both will have an excellent ...

...route is going to be a used engine. Replace with a used engine or a branded rebuilt engine (like jasper or ATK) or...junk it. This is an expensive job and many mechanics do not perform this type

...Unless its in 100 percent perfect condition, or you really love it that much. I would recommend a JASPER rebuilt engine. 3 yr/ 100k mile

...with jasper engines on cost of an engine. price is gonna be different for area you live and all. last i checked that engine was around $3500 - 4000 not many used ones around at least not down