1996 GMC Sierra "snap ring pliers" Questions

...snap-ring/e-ring pliers or by using two small screwdrivers to pry the lock-plate securing ring off of the steering shaft. Here are some images to assist you, and at most auto part stores you can ...

...stick your snap ring pliers in and take the ring out then assemble the puller on it and it will pop out the snap ring holds it in place i would reccomend replacing that too....hope i could help ...

...snap ring pliers to remove the pushrod retainer from the stud on the brake pedal. Unsnap the brake light switch from the pushrod. Disconnect the electrical connector from the brake light switch. To ...

...snap ring off the rear wheel bearing? Question edited for clarity. Question moved to category. You need a good pair of Circlip Pliers. https://www.google.com/search?q=circlip+pliers Removal videos ...

...snap ring pliers & squeeze the snap ring that is holding the bearing in out. The snap ring is a circular clip with 2 eyelets on the end where the "C" part is. It should pop out & chances are ...

...is a snap ring you will need snap ring pliers spred the snap ring open and pull it up then the knob is free to pull up be sure to remove the counsle upper plate so the boot can come up with the ...

Do u need special snap ring pliers to remove hub bearing on 98 ford windstar There are only 2 types of Snap rings, internal and external, each has a different tool.

...set of cluitches out of my 98 jeep grand cherokee 42RE transimission? There is a snap ring that is in a groove that cannot be spread. U need to perchase a set of large snap ring pliers,ive been ...

...can change the joint and replaced after you have the new one in. It helps if you have a set of snap ring pliers but it can also be done with a pair of screwdrivers with thin blades. Hope this helps. ...

snap ring pliers, but don't see one. I see the groove at the base of the cap, but no ring, just a groove. What am I missing? its not a snap ring in the sence that there are no holes for the pliers.use