1991 GMC S-15 Jimmy "timing marks" Questions

...timing marks lined up....however the truck will not start....i need to know where the timing marks are to line up i believe there are two marks on the crankshaft pulley from what i have in this ...

marks on the timing cover. there are two marks on the balancer one lines up with the mark on the timing cover and the other lower mark lines up with a mark on the block. then you need to look down the

...timing on my 92 jimmy and the marks next to the balancer pulley are rusted. Can anyone tell me which mark I need to have the timing line lined up with? The illustration in my Haynes manual is ...

...over till TDC marks on crank pulley and timing cover marks line up, fit distributor to motor with rotor pointing to number one distributor cap tower, start and set final timing with timing

i need to know how to set the distrubtor The ignition timing is not adjusted with a timing light or with the engine running, and to set the ignition timing follow these procedures. There is a mark or ...

...rotate the crankshaft until the mark on the damper pulley aligns with the 0º mark on the timing plate and the No. 1 cylinder is on the compression stroke. You will know when the No. 1 ...

...timing marks on a 2000 gmc jimmy to put it at top dead center Is this a 4.3 V6 or ? You will have to get some carb cleaner and a rag and wipe the grease off of the timing mark plate on the timing ...

timing marks on the timing gear and chain? This is A 4.3 there on the front of the gears drectly under the teeth it looks like someone started to drill a hole in the face of the gears one on each gear

Are the timing marks on the viabation damper to be lined up when the rotor points to the number spark plug wire? # 1 plug needs to be top dead center then align marks

...timing marks on engine took distributor out to replace intake gasket the timing marks are on the timing cover housing at the top of the crankshaft or just slightly to the right . They are a series of ...