1989 GMC K1500 "put turbo 350 car reverse" Questions

Ad

...turbo 350 that works in all gears except drive. put it in reverse, it goes backwards. put it in 2nd, it starts off in low and shifts to 2nd, and down shifts from 2nd to low, just like it should. put ...

Ad

...turbo 350 I have a 71 chevy pick up truck with a turbo 350 that has been sitting in my garge for 14 years. I just got it running again and it will not go into reverse. What should I be looking for? ...

Ad

Question about GMC K1500

1 Answer

...I have checked the linkage and it seems to be working fine. the trans. fluid level is fine also. Can you give me any suggestions? 79 350 turbo trans, when you put it in reverse it poors out trans ...

...turbo hard shifting from reverse , alignment of stick is not always the same. Is this a linkage problem? Hi,sounds like it could be a broken gearbox or engine mount.that would put the selector out ...

...turbo trany. This is going to sound crazy. But I changed the power steering pump. I have to climb up into truck. It has a 6" lift with 38" tires. So while changing im literally up in the ...

...turbo trans 350 and got a year of service out of it that way before I had to replace the tranny. Just do not put too much brake fluid into the tranny, I would recommend one or two capfuls to start ...

Turbo 400 will start out in 1st gear usually then won't shift till about 40MPH. Will hold 2nd gear till I guess around 60 or 70. Any load will kick it back to 2nd. If at a stop light or something will

...put into drive mode and sometimes just sits there while i hit the accelerator. When it gets going on the highway it seems to be alright until i slow down to a stop and go again. It goes into reverse ...

...put a turbo 350 in my 1989 chevy 1500 with a 350 in it and its works fine. but when you put it in reverse does it just rev. up or does it move a little bc i had a problem just like that but it would ...

Question about GMC K1500

1 Answer

turbo trans had someone rebuild 8 yrs ago sat on bench while building car just put in and forward gears are fine but when i put it in reverse the wheels only **** and thats all whatever **** means? If

Not finding what you are looking for?
Cars & Trucks Logo

106 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...