2000 GMC New Sierra 1500 "removing starter" Questions

Ad

how to change a starter on a 2003 gmc 1500 pick up Disconnect negative battery cable.  Remove battery cable and solenoid wire from starter solenoid.  Remove bolts securing starter to the ...

Ad

how to replace a starter on 1994 gmc sierra 1500 with a 350 engine unhook the battery, there are 2 wires on the starter solenoid, 1 is a 5/16 nut and the other is a 9/16 nut remove those wires. this ...

Ad

When I try to start my 1986 GMC Classic Sierra 1500 the starter.. When I try to start my 1986 GMC Classic Sierra 1500 the starter sometimes grinds against the teeth of the motor , I had to change last

Question about GMC Sierra 1500

1 Answer

...wires from the starter,otherwise, you'll ground those wires out and have fireworks. Also, draw out a diagram of the wiring before removing them,so you'll know where they go back on your new

Question about GMC Sierra 1500

2 Answers

...removing the starter, make certain your battery cable connections at the battery are clean and tight. Dirty or corroded terminals will cause a high resistance problem. Make sure all cables, positive ...

Sometimes the engine will not turn over when you put the key in and turn it to start the vehicle. I've checked the battery connections and for corrosion and neither are present. Need help Year ? 350 ?

Question about GMC Sierra 1500

2 Answers

rear wheel noise I have a sqeeling, grinding noise from right rear wheel. wheel seems to have play when pushing in and out on wheel aprox. 1/8 to 1/4 inch. thanks Rob. Brakes or bearing would be my ...

i need instructions on how to change out the ignition switch on a 2004 gmc 1500 pickup truck Hello Steve...The lock cylinder will come out if you can turn the ignition switch. You have to remove the ...

Question about GMC Sierra 1500

2 Answers

...without removing either of the two axles. The only othe things to come off is the starter and the oil cooler lines if equipped, and dont forget the two hidden bolts at the back near the bell

Question about GMC Sierra 1500

2 Answers

Changing starter on GMC sierra diesel I found the two 9/16 bolts but it seem that the starter is still hung up on something what could be the problem getting it out? Thanks Karen Yes...this has a ...

Not finding what you are looking for?
Cars & Trucks Logo

658 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...