2000 GMC New Sierra 1500 "caliper" Questions

dropped brake caliper now the brake piston is sticking ,could i have messed the brake line up ,thecaliper was hanging by the brake line Most likely not,the caliper,or the brake hose is the ...

2006 chevrolet 1500 brakes shimmy without touching them,also when setting still mash couple times let off ,wheels hard to turn check for front brake calipers dragging, if the are replace calipers and ...

...hot, jack it up and see it the wheel spins free or drags? if it drags, then loosen bleeder on the caliper, it if now spins free, you want to replace that caliper hose, if it is still dragging, then ...

1989 G20 Van right front brake is locking up when applied. Calipers replaced. Did not fix problem. The piston is binding in the wheel brake cylinder, perhaps a bit of rust in the cylinder. Inspect it,

what size torx socket to remove caliper on a 2000 Gmc sierra ,1500 the torx socket is either a 55 or 60 for the caliper bolts.

...it could be anywhere and you should have seen some drops on the floor by now. Sounds like a "stuck" caliper piston. Many Chrysler products (by example) used "phenolic" pistons in the calipers which ...

GMC Sierra rear brake pads The rear brake pads on my 1999 GMC Sierra will not fit in the caliper with the shims installed. Should I grind them to fit or install without the shims? make sure piston is ...

Removing brake calipers to replace pads. Removing front brake calipers to replace pads on 2001 GMC Sierra 1500 4WD   Unsure of which bolts to remove? Try this Video, I think they got the model ...

when i push break pedal on my 2003 gmc sierra the abs activates. replaced the front calipers and pads still does it any ideas hi there i had this same issue with my 2000 gmc and it was a quick fix i ...

i can't remove the rear brake calipers on my I can't remove the rear brake calipers on my 2002 GMC Siera 1500 Z71. Do I need to remove the two 3/4" bolts which attatch the brake assembly to the hub ...