2000 GMC New Sierra 1500 "brake fluid left front" Questions

...brake repair shop and they ran the ''abs'' diagnostic set on it which told me that it was a bad left front sensor. Well I've had it replaced and they still come on even after the mechanics told me ...

...brake hose on left front has a slice in it and can see cords but dont see any signs of swelling. what could it be? Your master cyl. may not be sending the fluid to the brake system like it

...brake fluid or transmission fluid. I need to know what types of fluid could possibly leak there. Also, where do I check brake and transmission fluid levels? If it is near the tire it is brake fluid. ...

...leaks (wet spots).anywhere also no lose of fluid. If left front brake is binding it will cause brake fluid to boil which inturn causes air in system, then soft pedal. [may also explain lock

brake fluid 7-Have helper push brake slowly and evenly until at board, and they should let you know they have stopped. 8-Open BV 1/4 turn. Old fluid and any air will go in jar. When it stops, close BV

brake fluid leave cap off and gravity all brakes make sure master cylinder stays full. After you have good fluid dripping from all wheels. Have a helper pump pedal and hold it as you bleed each wheel.

...brake fluid input I have a 1987 Mercedes Benz. My nephew helped me by adding brake fluid and power steering fluid however I think he put it in the wrong places so I need to know the location of brake ...

...brake slowly air will come out then a little fluid. tighten screw and say pump it up "holding" as fluid in coming out pedal will sink "Keep pressing" repeat util clean fluid appears. check master ...

...brake and power steering fluid flushing/change i just want a help with changing my old brake and power steering fluids with new one.will you give me some steps in do it yourself?thanks. As you are ...

...fluid and bleed brakes. Piston will not retract when you release brake lever. The brake hose is clogged.  When under pressure from applying breaks, the piston is forced tight to the rotor. When ...