...animals. then remove the thermostat cover, clean the mating surface, before replacing the thermostat. thake note of how the old thermostat is mounted and put the new one in the same direction. then ...
Question about Cars & Trucks
animals remove 2 (or 3) thermo housing bolts with hose attached wiggle loose therostat is inside BE SURE to put new one in same way as old one Clean both mating surfaces well but don't scratch surface
animals so clean up spills ASAP. Only drain half the coolant and close ballcock. Now find the upper rad(Radiator) hose and follow it to engine then remove hose clamp and pull/pry hose off nozzle. Were
mating surface on the engine, once clean, apply Copper Plus RTV sealant (or similar) to both sides of the gasket that you bought when you bought the new thermostat, intall it and the new thermostat in
...mating connector. With a container to trap lost coolant (it can poison animals) and a tight cooling system, these switches can be removed and quickly replaced with little coolant escaping. Use Teflon ...
...animals & humans so clean up any spills & cover any containers, remove the accessories & accessory belts & hoses and any brackets that block the access to the pump as well as the ...
...animals, so be sure to protect your pets by following proper disposal procedures. Once drained, remove bolts on thermostat housing, remove old thermostat (taking care to notice its orientation in ...
...ANIMALS.WHEN DONE DRAINING SOME ANTIFREEZE.FOLLOW RADIATOR HOSE TO TOP OF INTAKE TO THERMOSTAT HOUSING. LOOSEN HOSE CLAMP REMOVE RADIATOR HOSE FROM THERMOSTAT HOUSING.THEN LOOSEN HOUSING BOLTS.REMOVE ...
Question about Ford Cars & Trucks
...ANIMALS AND WILL KILL THEM AND IT TASTES GOOD TO THEM. BE CAREFUL. remove hose from housing and old housing clean manifold mating surface and bolts install gasket w/ sealer dab of sealer on each bolt ...
1,118 questions posted
Usually answered in minutes!
2,348 Questions
2,262 Questions
2,120 Questions
1,869 Questions
1,431 Questions