2002 Ford Explorer Sport Trac "max break light replacement" Questions

...Break light on Proportional valve? For some reason these vehicles you need to bleed brakes several times, had same problem, so air hangs up in lines somewhere it apears. When you say brakes sticks, ...

break light swich ,when I put it back I press the pedal to the max while I introduced the new one on.Everything seems to be fine till I started driving it and my esp and abs and parking brake came on.

...break flud ? no. you need to tighten the hand brake cable, or if the is tightened to the max already then you need to replace it with a new one. brake fluid low will be indicated with alight when the ...

Break light coming on dash. Goes off and on. Is it safe to drive? What do I check for under the hood? and where? Hello. Welcome to FixYa. Please allow us to assist you. We are sorry that you are ...

...Light is on and my power steering is out. Help, I need to learn how to fix it, since I am unemployed. Evelyn the belt fall off, open hood, gander. and bingo. belt loose or missing. there can be 2 ...

...break fixing clips. Take care as their are wires feeding other equipment you do not need to remove panel completely. Release cable to mirror Remove three nuts holding mirror to door these are behind ...

break fluid container in the engine bay at the driver side. It has a cylindrical disc attached to the wall. It has the indicator to the level. It should be just at MAX. As for the light, check also if

...light ame on, but no buzzer. we are at our wits end now. please help! the short answer is electronics. the long one is i suspect a fault in earthing. i installed an aftermarket temp sensor and gauge ...

max. we've moved to Cyprus and brought the car with us as I couldn't stand to be without it. The fuel out here is filthy so every time I fill up, from empty, I use the cleaning fluid (if I don

max' out at 120 psi cold at 3000 rpm and run 45 to 80 psi down the road warmed up = Good engine. The 1.8t however must never see oil pressure above 90 psi or things get damaged. Valves and valve gear.