1992 Ford Crown Victoria "1997 grand marquis start relay" Questions

Ad

...1997 grand marquis (oh secondary issue not sure if linked but may be -- blinker fuses has been popping every 2 days - short probably in trunk can that fry my relay button or is it a seperate issue?) ...

Ad

grand marquis only getting 6 volts to fuel pump when key is on. through the ecm. replaced with a new ecm and still reads the same thing. why? The PCM does not supply voltage directly to the fuel pump.

Ad

...grand marquis 5.0 litre tbi wont run. fuel pump wont come on unless you run wire from battery to fuel pump but car wont start with fuel pump running. new fuel pump because i wasnt getting pressure to ...

It cranks but won't start. The fuel pump doesn't make noise. Then all of a sudden it works. Sounds like a bad fuel pump relay.

...1997 Mercury Grand Marquis replaced starter and reprogramed remote and still won't start just keeps on buzzing It sounds like the positive light feed is back feeding the flasher relay. With your ...

Question about Ford Crown Victoria

2 Answers

1997 grand marquis wont restart when cold problem started last winter, if i start car to let it warm up will stall when i put in drive and not restart for 20 minutes. no codes will turn over but if i ...

my 97 mercury stopped working.the engine would not turn over it was the same thing that happened to a friend of mine. so i found the fuel shut off valvue that the mechanic showed me in the trunck of ...

start, and the fuel pump seems to be coming on when I turn the switch. What else could it be? The starter maybe, or a relay? If the engine is cranking over, it is not a problem in the starting circuit

Question about Ford Crown Victoria

1 Answer

Grand Marquise just started a loud ''tick tock'' sound that seems to be coming from behind the clock or the air conditioner/heater control panel. It keeps up a regular rhythm, like a clock, regardless

...relay terminal that you disconnected the starter cable from. Get inside your car and turn your ignition switch to the start position. The voltmeter should show that voltage is being sent to the ...

Not finding what you are looking for?
Cars & Trucks Logo

371 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...