...power steering belt Loosen the bolts that attach the power steering pump to the bracket. then push the pump down. this should make the belt loose enough to get off. then put the new belt on. take a ...
power steering is hard to turn at times, fluid is full, is there a belt other then the serpintine??? i dont see one on the power steering pump does it make noise when turning ? when installing new ...
...power steering pump a week ago. the steering worked great for a few days and then totally quit. there is no power assist at all anymore. suspecting the rebuilt pump failed but looking for other ideas ...
...power steering belt on 2000 Dodge Stratus V6, is there a tensioner? There is 3 bolts on power steering pump that should be loosed but not removed. 2 on the bottom and one on the top that will have to ...
...power steering belt located in the ca... Where is the power steering belt located in the car? It depends on the engine. Some engines have seperate belts for diffrent accessories and some have a ...
Question about Dodge Stratus
my steering is squeeling and hard to turn when I first try to drive it. Could be as simple as loose power steering belt, or pump beginning to fail. Check your power steering fluid levels.
power steering belt. it is a 1998 dodge stratus. how do we remove the belt and replace it? You should have a repair manual. Basically you should raise the car and support it on jack stands, remove the
Question about Dodge Stratus
...steering hard. There is no leak. How can I tell if it is the power steering pump or the steering gear. There are no leaks. Jack up front of the car and test sreering with engine off and then
Steering related if it does not have power assist and turns hard sitting still try revving the motor slightly while turning the steering wheel if it feels like it turns easier then you may have a pump
1,399 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
772 Questions
621 Questions
528 Questions