Question about Dodge Stratus
...head to a tool company to ask if they will make a socket. You can try a damaged nut socket my Blue Point would go all the way on but may cut off the ends. Then you would go down to the next size. An ...
bolt head. Place the socket in a vice and use a grinder to grind of the face of the socket until the sides are square across. This will give full contact with the bolt head inside the socket.. Another
what is the size of the front caliper bolts on a 2001 chev. blazer Full size 3/8 allen (socket head) T40 torx on the small blazer replacement bolts can be 8 MM allen
Question about Cars & Trucks
...belt on my Daewoo Lanos and am looking for the bolt size on the crankshaft pulley so that I can purchase the right impact socket. Measure the bolt head & divide by .0395 to convert to metric ...
head bolts what size are the head bolts on a 2001 jeep cherokee try a 15 mm socket
...bolt head will not strip. If the bolts were threaded correctly when they were tightened, then they WILL NOT strip when loosened. If you cannon get the bolt to break loose after using the penetrating ...
head". You can buy a set of them from most auto parts stores, Sorry I don't remember the size right off hand. There are 2 bolts that hold the calipers on. You will need a 17mm socket or wrench! I just
Question about Dodge Stratus
...bolt head on the end/tip of the bracket that the pulley is mounted to. That is the adjuster. Loosening that bolt loosens the belt and vice versa. The power steering belt tensioner is very similar. ...
bolt that needs the 47 star socket goes on top just to the right of the hose behind the pump. I can't tell you all their lengths but they should all be the same thread and bolt size. Just try them
what size torx socket fits the head bolts 1.8 engine Not positive, check a 50
1,399 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
772 Questions
621 Questions
528 Questions