2002 Dodge Stratus "change blower motor switch" Questions

...change a ac fan control for a new one but still with the same problem as mine whit the speed number 4 the lower numbers donot work is the any other problem with it Details I had this problem with a ...

...change two nuts to remove the panel under your dash on the passenger side, unplug the it, two bolts hold the resistor in....simple, you can buy the part for 10 dollars if you do a quick internet ...

...gasket will also will cause the engine run a bit hotter than normal. Have your entire cooling system (includes heater core) professionally flushed. Check your fuses. Your blower motor fuse may be

change the blower motor switch. The blower motor switch on your car lets you control the power to your blower motor. The blower motor is a small motor that blows out hot or cold air through your vents

...blower motor speeds it's more than likely the Resistor pack. And a lot easier to change...Guru...saailerRemove climate control:Remove the instrument cluster finish panel... Remove the 3 climate ...

blower doesnt work on all speeds Step 1: Check fuse Step 2: Change relay (usually can swap with another relay in the fuse box and try it) Step 3: Check connection on switch Step 4: Replace Switch Step

...the motor with key on, blower switch on. If no voltage, then check the relay, fuse, blower motor switch and resistor.(in that order) IF you have voltage, but motor don't work, change the blower

...change. You could unplug the blower motor and use test light/probe to make sure you have a power signal from the switch to the blower motor.If therse power then the blower motor is at fault.If no ...

...change of any sort on the blower motor connector. do most blower motors than work off of a current change? i had this problem many years ago and it wouldn,t show any changes to control the motor, ...

...blower motor but fan stays running when shutting jeep off changing the blower motor was a waste of time and money, you have power going to the blower after the switch (button) is turned off, could be ...