...coming rear change axle bearings on both axles as garage said that was problem after repairing both sides new bearings problem still exsists please suggest other as paid 500. and problem still there. ...
...noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds) Yes the dash ...
...noise, now it doesn't work at all. What would the problem be? Where do I start to check it? THE BLOWER MOTOR IS PROBABLY SHOT. TURN ON THE IGNITION SWITCH, BLOWER ON HIGH, TAP ON BLOWER HOUSING WITH ...
Question about Dodge Dakota
...if the noise is coming from the passenger window or the right side of the car. What could it be? the noise is coming from the inside of the eng copartment passenger side .its where the wiper motor
Question about Dodge Dakota
...noise on my peugeot 306 passenger door/ cl unlock n locking thing i get a groan coming from my passenger door on my car i think coming from lock or there abouts, my dad seems to think a loose earth ...
Question about Dodge Dakota
...noise coming from back passenger side wheel when backing up When I back up my 2002 trailblazer a loud whirring sound comes from the back passenger side wheel. Not sure if a bearing is out or not. Do ...
...noise coming from the passenger side,upper side of motor,..as i take of the oil cap when motor running,noise gets louder and car struggles but keeps running as i put the cap back on noise goes away ...
noise on riht hand side on the inside back if it is coming from the back and vehicle has auxillary a/c then more than likely one of your blend door actuators is failing usually a ticking type noise ...
Question about Dodge Dakota
...coming from passenger side (sounds like front end but hard to tell) most easily heard at 35mph and under. This noise abruptly stops when I apply the brakes. Ideas? Thanks sounds like a brake pad ...
Question about Dodge Dakota
...noise coming from rear passenger side of car. Drove it 9 miles. But yet no heat coming from wheel hubs. Wipe and clean wheel areas before repacking ball bearings. Front pads and rotors have been ...
1,595 questions posted
Usually answered in minutes!
870 Questions
712 Questions
723 Questions
618 Questions
593 Questions