2001 Dodge Dakota "gm 4 oil pan removal" Questions

Ad

Question about Dodge Dakota

3 Answers

...GM screen move it 1/4 of a inch away from the pan or add 1 inch to the bottom of the pan, (use a high volume pump) the problem is the screen is too close and too small and will pick up any sludge off ...

Ad

Question about Dodge Dakota

1 Answer

...GM P/N 12346285 loctite 5900 on the ends down to the ears. Install the oil pan, bolts and nuts and install everything else in revers to the removal. Refill the engine with oil and wait for the sealer ...

Ad

...4 turns. Lightly tap the oil pan with a rubber mallet in order to loosen the pan and allow the fluid to drain. Remove the remaining oil pan bolts. Remove the oil pan and the gasket. Remove the filter ...

Question about Dodge Dakota

2 Answers

...4 quarts total, use GM spec ATF it is called DEXRON VI. (Hint, the amount that comes out is pretty close to what you'll need to put back in.) Don't overfill! As soon as it stays on the stick as you ...

...4 quarts. (I think it might make removing the pan a little less messy if you did remove this plug first). this is not easy to do, I don't understand why GM ever came up with this type of tranny and ...

Question about Dodge Dakota

1 Answer

...4 servicing isuzu has no dealership since gm owns them now i called a gm dealer and they didnt know how what i did was drain what was in the pan and get a rubber hose that fit tight in the drain plug ...

Question about Dodge Dakota

1 Answer

4 which has been sitting for about four years with a bad head. Replaced the head and the oil pan due to a crack. When started it has only about 20# of oil presure and it drop into the red line when it

Question about Dodge Dakota

1 Answer

...GM part 89017342 or ACDelco part PF61 for the 4.6L V8. 8 Pour six quarts of motor oil in the refill cap opening of the V6 engine and eight quarts. into the V8 engine. Cadillac recommends that you use ...

GM unfortunately made one bolt on the water pump that you can't get to w/o messin with the motor mount. There are actually two bolts that have access holes in the motor mount but in many cases you can

...4. Remove front cover as follows: a. Remove coolant reservoir or surge tank. b. Attach engine support tool Nos. J-28467-360 and J-28467-400, or equivalents, onto alternator stud-ended bolt. c. Remove ...

Not finding what you are looking for?
2001 Dodge Dakota Logo

1,595 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

1993 Dodge Dakota
1993 Dodge Dakota

593 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...