2001 Dodge Dakota "axle nut 4x4" Questions

...the front axle nut is on a 2001 dodge dakota 4x4 . i have been having alot of noise in the front end and i think that it might be the bearings There only two size for your truck 32mm or 36mm

axle nut. Remove the cotter pin, then the nut. Be careful of the ABS connection on the back of your hub. Replace bearings, races and the seal. Let me know if you need to know how to load your bearings

nut off the end of the axle shaft and be prepared to beat the old assembly off with a heavy hammer. You will not have to drop either ball joint, although you should inspect them for wear at that time.

...Axle Nut Torque Spec : 203 ft-lbs · Toyota Tundra Wheel Hub Torque Spec : 100 ft-lbs ... BHA53102 Axle / Spindle Nut Torque Specification 1A Auto https://docs.1aauto.com > BHA53102 Torque S... PDF ...

...DIDNT LUBRICATE THE SEAL LIPS WITH PETROLEUM JELLY TO HELP THE THE SEAL LIP SEAL OR YOU DAMAGE THE SEAL WHILE DRIVING IT IN.AXLE FLANGE NUTS TORQUE IS 58 FT LBS THE AXLE HUB NUT TORQUE IS 177 FT

...wheel remove upper balljoint nut seperate ball joint from spindle remove big nut from center of wheel remove six bolts to inner axle and carefully knock axle out of hub repeat in reverse for ...

...axle bearing torque spec I believe its 50 ft/lbs for the nut and the lock nut. If you're talking about a 4x4, if it's a 2wd and you mean the spindle nut, then I'll have to get back to you.

axle nut (4x4) remove the caliper and the rotor. remove the outer tie rod from the knuckle. Remove the upper and lower control arm nuts and remove knuckle from vehicle. Using a ball joint press remove

...it a big worldwide secret what size the axle nut is why is it a big worldwide secret what size the front axle nut is on a 01 dodge 1500 4x4 1 11/16 odd size i know. check with Sears or Harbor

i need the touque specs for the outer front axle nut on a 2005 dodge ram 2500 4x4 HUB AND BEARING ASSEMBLY NUTS TORQUE TO 125 FT LBS THE HALF SHAFT AXLE TORQUE TO 185 FT LBS.