2000 Dodge Durango "wrong headlamp high beam works" Questions

...wrong. All the other lights work, interior, tai, brake, turns, high beams, fogs, etc. Its just BOTH HEADLIGHTS are out? Could both bulbs go bad at the same time? WHere is the fuse, because i think i ...

...wrong . Do you know how to test electrical circuits ? Viewing wiring diagrams then using a DVOM - digital volt ohmmeter to test the headlamp electrical circuits . Possibly hooking up a scan tool an ...

...wrong. https://s1.postimg.org/1i7q5btlu7/headlamps.jpg Click on the link. The top wires to headlamp are voltage for hi or lo beam. The bottom black wire is ground. You can use a test light to check ...

...high beams :( Need to have an electrical shop determine what is wrong. It could be a fuse for the low beam headlamps that has blown, or a relay has been overheated. Check that the bulbs for the low ...

...headlamp switch.is your switch on the dash or part of the turn signal switch.gm have a thing with plastic switches and metal contacts these switchs have a tendency to melt..also check for grounds.was ...

...headlamp bulbs. If NONE of the headlamps are working, it most likely has something to do with the computer system and/or the electronics/wiring involved, NOT a fuse or circuit breaker. Please also ...

...headlamp don't work Low beams don't work on passenger side but there is nothing wrong with my daytime running lights or high beams Change the bulb/globe or whatever you call them. Check old one most ...

...wrong Use the other headlamp as a reference to figure yours out.  Terminal [position in the socket is the important thing, so match the color to the terminal on the uncut socket to see how yours ...

...Hunydai Tucson and my headlights stopped working. i have no day time running lights, high beams or low beams. whats wrong!? check the fuses it may be blown check the lamps and check the headlamp ...

...wrong between the switch and the bulb. Unless a fuse is hidden away somewhere it amounts to the wiring and connections, subject to tracing the wires using a circuit diagram. I seem to remember old ...