2000 Dodge Durango "pending code mean" Questions

...code set, but no pending codes, and it also means that one code is set and one code is in history. You will have the option to go to the next screen on the scanner to see what the set code is, it ...

...pending code mean? I scanned for codes on my van and I got a P0304 and a Pending P0304 and it says 2 codes returned? Can my computer be bad? P0304 means that you have a misfire on cylinder #4.Pending ...

...code 2187pd P2189: Sys Too Lean at Idle Bank2P2187: Sys Too Lean at Idle Bank1The other codes P2189PD & P2187PD are pending codes.. Meaning the car will have to recheck the errors before it calls ...

...pending? The belts are new. And they appear to be tight. But when I put the car in park it idle a little low. Basically the P0101 diagnostic trouble code (DTC) means that there is a problem with the ...

...pending code Pending codes and DTCs? Posted on November 12, 2010 by fcrmaster When reading codes from your vehicle the fault code reader may show them as pending codes or normal Diagnostic Trouble ...

...pending means? Can anyone give me any tips on what to try please? I have erased the codes with an OBD II scanner and the CEL keeps coming back on. Someone anyone please help! hi i have a code p0001, ...

code is pending, (or intermittent, stored code). Here is what the code means----this DTC indicates that an evap system purge flow was seen by the vehicles PCM ( computer ) during a non purge condition

...pending has heat the check engine light comes on and goes out temp is 195 has heat runs fine first checked it had 2 same codes po128 PO 128 is a coolant temperature beyond threshold code. It means ...

...code readers, they read hard codes and pending codes. Hard codes are in there, pending codes, mean it won't set the light until your drive it again and it malfunctions on the second drive. Misfires ...

...code sets once, and then again in "pending" it just means that a system-wide check was done a 2nd time, and the P0113 has still failed, so the PCM files it as "pending" (still at fault after a ...