2000 Dodge Durango "change front end bushings" Questions

...front suspension arm bushings. Tie rod ends, ball joints at bottom of front struts may need grease or replacement. Auto supply houses carry rubber lubricants--don't use motor oil--WD-40 works but ...

...front end when my brakes are applied and released,and on a hard left turn reverseing out of my driveway that is felt in the steering.Have had it at the dealer several times.They have checked the ...

...front end have to change lower control arm pin and bushing and front struts the only parts that look old are the struts and lower control arm bushing causing tow out if you only replace one side,you ...

...front end alignment. At my wits end i decided to look on line for help. Thank you all of you for your help. Tomorrow i will change the sway bar links and bushings and see what happens. ( fyi, this is ...

...front end drivers side. I think its the stabilizer bushing is shot. It looks easy enough to change. should I change the whole stabilizer bar or just the bushing? Just the bushings, normally the ...

...front end ball joints brakes you name it i changed it even the upper control arm bushings. Problem went away for about 3 days after changing the upper control arm bushing, now it's back. Does anyone ...

front strutt bush very loose , steering very woolly replaced wishbone and track rod ends only thing i can think of is new bushes to solve the problem. If the bushings are worn, then it is best to ...

front right tire suspension squeaks at every bump and turn have the frontend checked out....can be ball joint or tie rod ends.....It can also be control arm bushings or swaybar bushings..Try spraying ...

front end shimmy The front end resonates while going down the road (on occasion, not constantly) and I just changed the steering damper 2 months ago. What else could it be? Sounds like you may have ...

...front end problems. It makes popping noises while driving on rough roads and some smooth roads. It sounds like the front end about to come out of it. I've already changed the left side cv joint and ...