2001 Volkswagen Beetle "change vw cam sensor" Questions

...vw mech are not fixing it Cam folowers are worn.Any good garage will change them for you.You realy need to get this repaired.The followers are sticking holding the valves open.And thats messing up ...

...vw 2.0 starts runs but surges advance throttle to aprox 2000 rpm dies? codes po322 po341 p1543 p1565 maf disc onnected get code po102 Throttle position sensor TPS is not behaving. Codes p1543 and ...

...vw fox 07 reg ave change the cam sensor and the crank sensor the plug and the throttle body when I start the car there no power in the throttle paddle You need a VAG scanner to diagnose this, consult ...

...VW TURBO TDI is sick- Help me please... The problems began in this order and i never had a problem before...... 1- Changed the Timing Belt 2- Engine Light came on ...diagnosed code: air flow sensor ...

...VW PASSAT 2.0 REPLACED ENGINE NOW CAM SENSOR OUT OF RANGE. WILL OUT START, ACTS AS IF OUT OF TIME, REPLACED CAM SENSOR there mayb more to it--if u didnt change computer-may not b compatible n u need ...

...vw Jetta 2.0 Acceleration problems car runs fine up to 2200 rpm in 2nd gear then cuts out. it keeps running and if you push gas pedal slow you can drive at 3000 rpm I changed fuel filter an mass air ...

...vw passat 1.8tsi rough idle for first 10-15 mind after startup. Will occasionally stall during rough idle but starts right back up. When it gets really bad it has thrown codes p0011 and p0016. I had ...

no spark 1999 passat 1.8 liter no spark on my 1999 vw passat 1.8 litero . change cam and crank sensor new plugs what else... check your voltage reculater and your air filters

vw passat 2.8 has 16725 (po341 code changed cam sensor and the problem still there What is the problem?

...VW Golf, will not turn over at all. The car started this morning, ran few a few seconds, than died. Replaced the battery but still wont start run fault codes and check for cam/crank position sensor. ...