1999 Volkswagen Passat "replacing blower motor vw" Questions

...is built into the blower motor and can NOT be removed You are going to have to replace the motor Best of luck John Here's the location on a 2008 Rabbit. Should be similar for most VW

...blower motor only works on number 4 setting why? Its a vw passat 1997 1.8 20v se you need to replace the blower motor resistor module. usually only has 2 screws and a plug and is located above the ...

...blower motor 750 i said no firestone said blower motor 700 local guy said 600 - i bought the part and changed the blower motor myself behind the glove box and the relay it worked on low speeds then ...

...blower motor is not working on any position. If I turn the knob to 1 - 4 and switch the AC button on it lights up and as soon as i turn the know to position 0, the AC light goes off, meaning that the ...

...blower motor and squirt in some (preferably synthetic) oil to cure the problem before removing and replacing the motor. If the oil cures the problem, wipe the rear housing clean and wipe it with some ...

...replacing it. I would greatly appreciate someones knowledge on the removal and replacement of this item Try to locate blower motor wires, usually up under dash on passenger side, maybe behind glove ...

blower motor I have a 99 vw passat 1.8t which does not blow any air from the vents. I have been told that the blower motor needs to be replaced. Does anyone know the location of this part and how to ...

...blower stopped working, all the controls work and there is heat when i'm on the move but fan won't blow and then every so often it kicks in for a while....any help? That's frustrating. If the fan ...

...blower motor. Mine and a couple others ive talked to all had the same issue. In this unit that metal arm is held by a plastic clip..... it breaks in turn dropping the metal plate and losing it ...

...blower motor wont turn on fuses good blower motor good help! My daughter has a 99 Beetle GL and the A/C and fan went out. It's the A/C haeadunit that needed to be replaced. The switches short out and ...