1999 Volkswagen Passat "know adjust valves 4 cycle" Questions

...know but not knowing you level of expertise I had to include all of it so forgive me if I have insulted your intelligence in any way. I just got an email from fix-ya asking me to help you. We used to ...

know how to do any of this, you probably shouldn't be in there to begin with. If you adjust them incorrectly you can damage your engine. Some engines have no adjustment and those you just have to wait

...valves, and is not on topic. last is your question, answered in generic forum we dont know what cap post is #1, sorry, no car here. or books. but if youd had marked it , at the beginning of all ...

...know its just a matter of time before it too ends up smashed and in my oil pan. Note: i did not change out the chain as the original one seems to be in good shape. It has been an on going battle for ...

...know if the system is full charged or if it is partially chrged by means of allowing you to see air bubbles passing through the sight glass only if the compressor is cycling/working, the parts stores ...

know? Good! Here it is! Leak Detection Pump (LDP) Operation And Diagnosis: * P0442-Evap Leak Monitor 0.040" Leak Detected * P0455-Evap Leak Monitor Large Leak Detected * P0456-Evap Leak Monitor 0.020"

...know? Good! Here it is! Leak Detection Pump (LDP) Operation And Diagnosis: This article describes the theory of operation for the leak detection system. In addition, information is provided for each ...

...4 counts while the above conditions are met. The vehicle will need to be driven more than 80 km/h (50 mph), and then allowed to decelerate. When the vehicle is decelerating, while meeting all of the ...

...know the diffr between cranking and starting) This is an EFI gas engine (otto cycle, tech) and as such needs fast cranking to start. No crank , no joy. does it? YES< then the battery IS good but ...

...4 to 7 psi less than system pressure on a fully warmed engine and 17 to 20 psi less than system pressure on a cold engine (typical system pressures are 5.0 to 5.5 bar or 75 to 85 psi). The signal to ...