1998 Volkswagen Jetta "warped pressure plate" Questions

...warped pressure plate, oil on the flywheel face /pressure plate face, faulty engine mounts. many people think that it is just a matter of replacing the clutch plate but this always results in a poor ...

...so the pressure plate goes down EVENLY. (YES, it's a pain in the keister!) If NOT, you'll have a warped pressure plate, and it will be junk! Thanks for letting me say that, I feel

...pressure plate for 2.6-l Isuzu 1991 pickup 4x4 Flywheel: The torque specification for the flywheel bolts is typically around 80-85 lb-ft (108-115 Nm). It's crucial to tighten the bolts evenly in a ...

...pressure plate by evenly undoing the pressure plate cover bolts. lift away along with the clutch plate Remember the way the clutch plate is facing as it will only go in one way. If the flywheel is ...

plate or pressure plate. the only problem is that you have to the whole clutch apart to do either. I would recommended you change the clutch with a pressure plate and possibly re-surface the fly wheel

pressure plate bolts install Not sure what the question is, but pressure plate bolts should be installed after you put the clutch alignment tool into the clutch disk, then tighten them a little bit at

...into any gears If this is a stick shift, try shutting the car off. If it goes into gear then your clutch pressure plate is warped. If its a automatic the shift interlock is not working as it

...causes. If it's hydraulic clutch - air in the system. Broken spring on pressure plate. Warped clutch disc. Cracked clutch folk. If hydraulics ok , transmission has to come out for the rest of

...you could have a bad slave cylinder, a bad master cylinder, the springs that create the pressure between the clutch and pressure plate might be failing or an overheated/warped clutch pressure

...bearing - broken clutch plate spring (not common) - warped pressure plate (rare) - warped driven plate (caused by poor installation) For all these except the engine mounts the gearbox has to come ...