...has 2 thorx screws near to the radiator.) once you have removed the cover turn it up side down and there are 5 phillip head screws. Removed them to remove the filter cover and get to the filter. ...
...2 that does not have a speedo cable and I want to fit it on but don't know where to begin you have to remove the instrument cluster from the dash. takes a little know how but can be done.. a ...
...to the radiator core support. There are some philips head screws that hold the 2 halves of the engine cover over the filter, you have to access the underside of the engine cover to get to
Question about Volkswagen Jetta
...HEAD gasket, and a VALVE COVER gasket. He said VALVE COVER gasket. There are 9 bolts holding the valve cover in place. Remove all the bolts, and the 2 metal plates on either side and slide the valve ...
...2 or 1 tooth. You need to loosen the tensioner and turn the cams ahead that much and re-tighten the tensioner, but no more than that. The head bolts need to be removed in a certain order or the head ...
head screwdriver. 1. Pop the hood. 2. Remove the two 10 mm bolts that hold down the air filter box. 3. Undo the clamp that holds the large tubing to the air box using your pliers. Move the tubing away
...2. You will need to purchase a gasket kit (calso called a "gasket set") for your specific motor. ($30) 3. Before you purchase any parts or books, check to see if the auto supply store will "lend" ...
...of engine you will notice 2 plugs with a square hole you can fit a 3/8 ratchet head in. the top is your fill remove that one first to make sure you can add fluid before removing the bottom one to ...
...head screws in there... Then remove your speaker cover then the speaker, then remove the speaker, then remove the speaker bracket, then lift the door panel out. The motors and the regulators for your ...
1,177 questions posted
Usually answered in minutes!
1,072 Questions
1,150 Questions
968 Questions
1,003 Questions
917 Questions