1998 Volkswagen Jetta "clutch install" Questions

...install a clutch? the mechanic should place or connect the clutch pedal spring to the clutch pedal .connect the push rod to the clutch pedal.then connect the push rod to the clutch master cylinder ...

clutch. the manual adjust is a direct swap out for the auto adjust. if you need info on how to install please reference this site http://forums.vwvortex.com/zerothread?id=1569293 i just got a 95 jetta

...INSTALL A NEW CLUTCH ? STILL HAVE SAME PROBLEM WITH REVERSE POPING OUT OF GEAR, AFTER NEW CLUTCH WAS INSTALLED,WHY? A shifter popping out of gear could be that the shifter linkage is not adjusted ...

...Gear is not shifting smoothly. My car (manual shift gear) , Jetta 1997, is repaired for broken clutch cable. Clutch set and cable are replaced at a repair shop. After that, gear is not shifting ...

install the tranny with it bolted to the engine and the cover for the release fork removed. You can push the clutch push rod all the way in (not hitting the presher plate and dissengageing the clutch)

...install engine mount may have damaged clutch linkage. Check it for clutch operation. Also look for loose bolts holding trans to engine. Have someone operate the shift linkage and clutch pedal linkage ...

...is fastened to the engine the release plate is too far recessed and the push rod won't release the clutch when the trani is installed and clutch cable operated. thats cos the release plate it on

...install it yourself. but its not the most fun job. have your friend sit in the car and push the clutch pedal, and measure how far the little arm connected to the tranny (that will move up and down ...

...clutch plate was put in upside-down or it was forced together during the install process, also could be slave-cylinder not bled properly, and some VWs also have electrical relays or switches for sync ...

no power to wheels after instalation of new clutch and transmission put new clutch and transmission in car but no power to wheels. checked clutch and transmission, both working properly. could it be ...