1994 Volkswagen Golf "wires going head light" Questions

...head lights to my mk3 golf. when i put my high beam on the main beam is going off. help please The wiring is different, if your Golf had headlights with H4 bulbs then changing to high beam turns dip ...

...head light or brights. it drives normall , I did check the fuses all of them looks good. any one can help? suspect x relay or wiring for this problem this relay controls all circuits for all inop ...

...head light buld and also the wires to the air filter but when we started the car back up we forgot to conect the wires to the air filter and now the engine managment light has came on and wont go ...

...is normal what would you suggest to fix this problem The low pressure switch (blue body) is threaded onto the back of the cylinder head and either it or its wire is going bad. Check and

...head screws from the bottom of the dashboard near the pedals, then pull the black plastic cover down. You can see the brake light switch from there, just follow the brake pedal up. It should have a 4 ...

...light goes out. if this is what you get you need to replace the plugs, I use OEM from a dealer as they are a bit fiddly to get at and the after market ones often dont last, even Bosch ones! To chnage ...

...light means there is a problem with the controller, wiring or one of several Glow plugs. These are only used to preheat the diesel-air mix (so it will ignite under pressure of compression while ...

...head. It looks like a person sitting blowing a big bubble. It should come on when you turn the key on and go off about 4-5 seconds after the engine starts. If your airbags were missing you would know ...

...light cluster. (If there is a safety catch on the connector, the connector can be gently removed by using a plain flat head screwdriver to slide the built-in switch on the connector all the way to ...

...head light wires comeing off head light look for breaks in wires burn marks etc trace wires until you find the source of problem in wireing cut problem wire area out go to parts store tell guy at ...