2004 Mazda RX-8 "replace clutch rx8" Questions

Ad

Question about Mazda RX-8

3 Answers

...a cable clutch look for an adjustment under the dash or under the hood on the firewall. Good luck, nice car! lp The 2004 rx8 has an hydrolic clutch most likely slave or master cylinder needs ...

Ad

...lost resistance from the pedal, you may need to replace the clutch slave. The clutch slave is the one at the end of the clutch line attached at the transmission. Check also for leaks on your

Ad

...replace all of the components of the clutch, including the pressure plate, clutch, throw-out bearing, pilot bearing, and the slave cylinder. This can be an extensive job, that is labor intense, so if ...

Question about Mazda RX-8

1 Answer

...replace the master and slave cylinders as well as a new clutch pedal kit. I pay for that and everything is working out great. Until today. I was driving to school and as I shifted into 2nd the clutch ...

...If it makes a loud noise you'll have to take it to a shop as the transmission has to be pulled to replace it. The clutch, pressure plate and release bearing are usually all replaced at one

...clutch pressure plate throw out bearing & pilot master and slave and new pedal assembly. So start car, reverse back put in first go about 100 yards, get out open my gate car dies. It now only cranks ...

...clutch just to reduce the loading on the starter motor). Check all the RX8 owners' forums - standard advice. DO use a confident turn of the key - keep cranking until it catches (but not for more than ...

...clutch twice so the fuel pump doesnt inject fuel and hold the ignition till it starts dont turn it back just hold it That is a good answer but if it doesn't work we always pulled the fuel pump fuse ...

...clutch in it. HELP!!!! i even have a new slave cylinder on hand ready to put in... need detailed description and possibly picts of the process..... Chris u need to have the dealer fix this, u will ...

Question about Mazda RX-8

1 Answer

...returns. (still not able to select gear however) clutch fork seems fixed in place not wobbling at all. baffled.  the rubber around the piston are worn remove from gearbox and replace rubber ...

Not finding what you are looking for?
2004 Mazda RX-8 Logo

864 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...