2003 Mazda Mazda6 "throttle body" Questions

...probably has deposits on it..and clean your throttle body thoroughly and let air dry for one hour before starting... and only use throttle body cleaner...also make sure your Air cleaner isn't

...air control valve ( IAC ). ALSO CLEAN THROTTLE BODY OUT. ESPECIALLY THE THROTTLE PLATE, it gets carbon and soot build up on it and it sticks, not closing properly. this will help a bit ! good-day

...throttle body so they replaced it. it was good for another couple weeks and now it's happened again. Any ideas? Hi. I guess replacing the throttle body is not the soultion for this problem. Try to ...

...it continues doing this. Cleaned cable and airfilter. Could be dirt or varnish inside the throttle body.  Could also be a sticking idle air control valve.  Is the check engine light on

...throttle body. What else could the problem be sounds like u haven't regularly serviced the car ! If there is oil coming out of exhaust it will most properly be a fouled spark plug or plugs but the ...

...a scale of 1-10 making a 7 on the good side - The rubber hose from air filter box to throttle body commonly splits along one of it's grooves and will open up on acceleration and cause a ...

...throttle body. I have replaced the TB and everything was fine for about 2 hrs and now the same behavior. I pulled the error codes and they are P0123, P0222 and P2110. I took it back to the dealer and ...

...cuts out when you turn air,heater ect on and when driving the engine does alot of bucking. once you step on gas it takes off Check for vacuum leaks first. Clean the throttle body also. Inside of

throttle body is a stretch. If you were not getting gas, the Mazda would simply not start. I am guessing here but I would say that the fuel pump should be checked. I do not know if you have had a tune

...ever replace a throttle body ? It is just a casting & a TPS Sensor Tune-Up --- as in spark plugs? What would that do? Who is doing that work on your car? What is the real problem in some