...6, 4 cyl has erratic idle. Idle will 2003 Mazda 6, 4 cyl has erratic idle. Idle will jump between 500 to 1000 rpms. Runs fine when pressing on accelerator. What might cause this? M.a.P. sensor, air ...
...idle air control sensor the pintle probably has deposits on it..and clean your throttle body thoroughly and let air dry for one hour before starting... and only use throttle body cleaner...also make ...
car on idle goes up and down and stops sounds like the idle air control is at fault
idle. My 2003 Mazda 6 wants to stall will idleing.Rpm's are less then 1000. Here is the most common cause of this stall, it is the idle speed control air-bypass valve and throttle valve, they get full
...6 and am getting codes on O2 sensors seeing a lean codition. I checked the MAF and am reading about 3.25 Gallons per second at idle. does this sound right or what else can i look at? Also sometimes ...
...6 cold air problem I put a short ram cold air intake on my car and when i start it up the idle is not right it sounds like it has an aftermarket cam in it but it doesn't. Check engine light came on ...
my car feels like it wants to stall when idling in drive clean the MAF sensor. Make sure it has a clean air filter.
idle air control valve ( IAC ). ALSO CLEAN THROTTLE BODY OUT. ESPECIALLY THE THROTTLE PLATE, it gets carbon and soot build up on it and it sticks, not closing properly. this will help a bit ! good-day
...6 that the accelerator will surge up to about 3500 rpm and will not idle down when stopping at a light. It starts doing this after running about 20 minutes. If I kill the engine and restart it, it ...
...it continues doing this. Cleaned cable and airfilter. Could be dirt or varnish inside the throttle body. Could also be a sticking idle air control valve. Is the check engine light on
705 questions posted
Usually answered in minutes!
738 Questions
386 Questions
293 Questions
74 Questions
48 Questions