2001 Mazda MPV "replace controller 5" Questions

Replace the ECM. Code 56 5 flashes, pause, 6 flashes Quad-driver voltage was incorrect for 5 seconds on the circuit connected to QDM "B". Code 57 5 flashes, pause, 7 flashes Boost control solenoid did

...or connections Common Misdiagnoses Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is an Intake Manifold vacuum leak Manifold Absolute Pressure ...

...5: Open and close the drivers door 3 times. (Door should be left open after this step). Step 6: ECU should respond by locking and unlocking the doors. Step 7: Press any button on remote #1. ECU ...

...5, 6 and all six spark plugs. The problem stoped and the car was runnign great until recently when the car started pulling again. PLEASE HELP!!!!!!!!! Ignition coils is the most common failure parts ...

...5-6 seconds. It also sound like the muffler sputters when idling. When I shift it down to 3rd or put it in nuetral the shaking minmizes, but you can still barely feel it. The check engine light came ...

...5 fault codes p0110 iat sensor circuit, p0180 fuel temp circuit, p0216 injection timing control circuit, p1189 pump speed signal, p0100 maf circuit, could anyone help i dont have any idea where to ...

...5 fault codes p0110 iat sensor circuit p0180 fuel temp circuit p0216 injection timing control circuit p1189 pump speed signal p0100 maf circuit could anyone help i dont have any idea where to start ...

BATTERY LIGHT STAYS ON. NEW BATTERY. ALTERNATOR CHARGING OK Ever since I replaced the battery (a couple of months ago) I have been having an intermittent problem with the battery not charging. It was ...

...5 liter and both of my cooling fan are not working i checked all the relay and they are all working i also replace the cooling sending unit and still not woking the car is not over heating at this ...