...Pressure Sensor/Barometric Pressure Sensor to the Power Train Control Module. Symptoms Check Engine Light will illuminate In many cases, no abnormal symptoms may be noticed In some cases, the ...
...air temperature (IAT) sensor 3 Throttle position (TP) sensor 4 Fuel tank pressure sensor 5 Engine coolant temperature (ECT) sensor 6 Crankshaft position (CKP) sensor 7 Camshaft position
...new code p2197 o2 LF stuck for bank 1 sensor 1 is stuck. Can anyone tell me what do I need to do? Thank disconnect the sensors cancel the codes start engine if the codes don't come back replace ...
sensors along the way in the air intake and emissions system. My Check Engine light indicated a bad sensor 1, bank 2 code (I think). I had my mechanic replace the sensor that was indicated as faulty..
engine to reach operating temp (190-195f) . As for the sensors, obviously its working, but if its corroded, its leaking and needs to be replaced. Better hope the plug is ok or you will need to replace
1989 mpv mazda does not start on cold mornings and days I'm assuming the engine cranks with the starter but does not start and run. check the operation of the cold start injector. This is a separate ...
bank 1 sensor 1 o2 sensor location bank #1is to the left of the engine when looking from the engine to the gearbox,the o2(lambda probe)sensor is on the exhaust down pipe.easier to get to from ...
where is the bank 2 sensor 1 bank 2 is the side of the V engine that has the lead cylinder further than the other side first cylinder- 'v' engines are staggered, that is #1 cylinder is closer to the ...
...engine cuts out and does not accelerate, changed the TPS, but not resolved, if the tps is off it accelerates more slowly, but reaches the rotation. thanks for the help. you will have both a throttle ...
761 questions posted
Usually answered in minutes!
692 Questions
413 Questions
309 Questions
262 Questions
128 Questions