2001 Mazda MPV "conect light car amp" Questions

...the starter has to be replaced. best of luck ok did you try jumpping it. it takes 12volts to light and it takes 1500 amps to start a car. so dont think that. now make sure your conection are

...it must be the bulb I replaced & now the tail light wont work (right side) & brake light will only work when head lights are not on ...any suggestions??? bad earth conections on rear ...

...car & started the engine, then the check engine oil light came on. Checked oil - not low & good color. No signs of leakage nor is it time for oil change. Turned car off and door locked ok. ...

...amp; then down and the gas light blinks and an autobal ding sound.won't give a true reading. Is the sending unit going bad or could it be a loose conection somewhere.It just started out of the blue. ...

...dos not work riplas fan. Allso you can worm up the car at normol oporation and test at fan conecter not the fan sid wit test light if light dos not com on the temperateur senser is folty riplas TMPS

when stopping my car feels like its about to die out & my battery light sometimes blinks ( on and off) Adjust the engine idle speed.Check wires for loose conections

...light up.now conect the multimeter to the neg batery cable with red probe and black probe to neg batery terminal . multi meter on (dc 10a) if it reads between 0.8amps and 1.5amps a light is on or a ...

...light flickered on and the amp gauge swung towards discharge. Truck ran fine but electrical accessories operated slowly. The next day truck started with no problem, light is out and gauge reads ...

when conecting to the positive terminal the side lights and indicator lights come on and the terminal keeps sparking You will get a spark if something is drawing amps, such as the lights you say are ...

...light comes on when stopping & goes off when accelerating. Low on oil or bad conection at sending unit. Maybe even a bad sending unit. Make sure the engine is off when checking oil.Not trying to ...