2001 Mazda MPV "coil wire" Questions

...the wires, something happened to the coil pack or the crank/cam sensors.  Or a fuse or relay for the coil pack.I would probably try an old plug wire to make sure, then check the coil for

...my 2003 Mazda MPV pull of the engine covers if so equipped, the plugs each have there own ignition coil, they are held in position by a single retainer, remove the coils to access the plugs. see ...

...voltage for the coil. Need to unplug the electrical connection not the plug wire and measure the resistance there and see if you have the 9 ohms of resistance. If you do not then replace the

...you have 1 bad spark plug you should replace them all same thing goes with the plug wire you can have the coil tested at the parts store i would replace the spark plugs and wires then go from

...wire at the coil and while the engine was at idle there was no spark and no change in engine idle. I pulled all the other wires and there was spark on 1/2/5/6. #4 wire had no spark also at idle. I am ...

that number 1 follow it to coil number 1. # 1 Cylinder is the one Closest to Firewall on Passenger side, so if it has a LONG Spark Plug Wire Fallow it back to the COIL and that is the COIN you Replace

...wire, or a coil pack / distributor. Keeping it simple...I'd go with the spark plug first and then look at the condition of the wires. Hope this helps... My Mazda MPV 2000, has misfire on #5, ...

...wire at the coil and while the engine was at idle there was no spark and no change in engine idle. I pulled all the other wires and there was spark on 1/2/5/6. #4 wire had no spark also at idle. I am ...

...Spark plug, or spark plug wire on cylinder 4 #4 cylinder could be faulty plug wire or plug or coil pack,I would start with plugs and plug wire and if it persist change coil pack I hope this helps ...

...coil wire is disconnected it seems to spin more freely but no fire on coil wire if moved close to cap connector. What should I do next Or is there hope for 349000 miles 1990 Mazda Mpv v6 check the ...