2001 Mazda Millenia "2 rear light removal" Questions

Ad

...rear combination light and 2 screws. Install 2 screws. Connect electrical connector. Connect battery negative cable. 2004 (Late Production), 2005-2009 To Remove: Turn Signal Lamp Disconnect battery ...

Ad

...2. Connect the rear combination lamp connector. 3. Reassemble the rear combination lamp assembly. Remove the tail light housing, to get to the lamp socket You should see three or more nuts holding it ...

Ad

Question about Mazda Millenia

1 Answer

...rear hatch of the Murano. 2. Remove the screws holding the rear trim covers in place. 3. Pull off the rear trim covers to expose the rear taillight housing assembly. 4. Remove the power connector ...

Question about Mazda Millenia

1 Answer

...2. Gently pull back liner doors to expose rear of light assembly. 3. Remove three brass 10mm nuts from exposed bolts. 4. Slightly lift up bottom inside corner of light assembly, Pull back or sideways ...

...you haven't figured it out yet ,you pull off the rear headliner center plastic piece,it just pulls down ,then remove the 2 puch pins on rear of headliner, then pull out light fixture and replace ...

...2) to the rear shelf panel. 5) Slide the trim forward to disengage the S-clip that secures the underside of the trim to the to the center of the shelf panel. 6) Remove the trim from the rear shelf ...

2. Remove the rear compartment lid trim. 3. Pull back on rear compartment trim panel. 4. Disconnect the backup lamp connector (5) from the rear compartment lid wiring harness. 5. Press the grommet (3)

...rear side of light assembly. 2.Remove bumper assembly.A.Remove four fasteners and four retaining screws from top of bumper assembly. B.Remove mud flap from bumper assembly. C.Remove two screws from ...

...lamp to engage retainers. Hi-Mount Rear Lamp Item Part Number Description 1 921 Bulb 2 56929-S2 Screw 3 13A613 Rear Hi-Mount Lamp 4 13A656 Rear Hi-Mount Lamp Cover 5 15A442 Rear Hi-Mount Lamp ...

Question about Mazda Millenia

1 Answer

...2 phillips head screws right where the light meets the rear hatch on the body panel. remove them and gently yet firmly pull the lens assembly from the corner of the rear body panel. Squeeze the clips ...

Not finding what you are looking for?
2001 Mazda Millenia Logo

395 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...