...iron... 25-35 watt. Do NOT use a high powered soldering gun or you will ruin the electronics!!! Remove the gauge cluster from the instrument panel. There will be several philips head screws you will ...
...philips screwdriver under the sunglass case. This will enable it to unclip. Problem is with the 510 chip on the circuit board, it is a cold soldier joint. Touch it up with a soldiering iron. Then put ...
...philips screws), replace the four capacitors it has on the back of the circuit board of the module (use soldering iron proper procedures), (each capacitor might cost 50 cents while the whole module ...
...Philips, torx bits, soldering iron, solder Steps to Fix: 1. Open sunglass holder 2. Remove screw holding console to ceiling 3. Grip and pull down on the front (windshield-end) of the console. It will ...
Question about Mazda MX-5 Miata
Philips screws and flip the circuit board over to expose the opposite side of the connector. Heat each joint up with the soldering iron, one at a time (I believe their are 12 of them in two rows of 6)
212 questions posted
Usually answered in minutes!
124 Questions
103 Questions
83 Questions
73 Questions
75 Questions
