1999 Mazda Millenia "flywheel" Questions

engine noise when turning key to off engine noise sounds like a metal ping against flywheel your ignition switch is shorting out

have a 95 mellinia s and it doesnt start.it tries and started for an instant but died.was told it might be cam or crankshaft sensors but dont know where their located.i messed up the starter trying to

...MAKES LOUD NOISE WHEN KEY IS TURNED OFF The engine noise sounds like something is hitting the flywheel when the key is turned to the off position. Could be the crank shaft. Had the same thing ...

...relay could be starter solenoid clutch staying on.this unit pushes out cog which meshes with flywheel to turn motor over. Either your starter selenoid is dragging or your ignition cilinder is ...

flywheel keeps breaking on 1994 4x4 explorer TRANSMISSION FLYWHEEL HAS TO ALIGN CORRECTLY.MAKE SURE FLYWHEEL IS IN THE ALIGNMENT DOWEL BOLTS TIGHTEN IN SEQUENCE IF NOT FLYWHEEL THATS NOT ALIGN ...

1994 Ford Escort- Went out to start the engine- The starter would turn but wouldn't engage the flywheel-160,000 miles on it, so I figured it was the bendix- I replaced the whole thing-all new starter ...

have a 1979 cj7 cant find a flywheel with right bolt pattern the motor is a amc 360 but a flywheel from a 360 has a differnt bolt pattern than mine any help please are you sure you have an amc 360 and

cost to replace starter & flywheel on a 2003 the dealership quoted me 12 hours of labor because they had to remove the transmission in order to replace the starter & flywheel & the ...

what i have to do to replace flywheel on a 2007 5 ford hundred 6 cylinder? I think the flywheel have bad spots on it. Describing this and doing this are definitely two different things. What is the ...

...a screeching noise sometimes just after the motor starts Replace the starter before it ruins the flywheel. You have a worn out drive that applies to the flywheel. Flywheels are very very hard to ...