1998 Mazda Protege "remove back seat" Questions

Ad

Question about Mazda Protege

1 Answer

Remove back seat How do I remove the back seat. Looks like it is bolted. The back seat simply "snaps" into place. Grab the seat one one side and firmly pull up on it. The seat should pop out of its ...

Ad

Question about Mazda Protege

1 Answer

how do i drain the fuel You must remove the rear seat cushion then remove the fuel pump module and then siphon out the gas. Be very careful if tan is over 3/4 full as it will flood back seat.

Ad

...remove the back seat on a 1998 Mazda Protege with standard rear seats? push HARD on the bottom of the bottom seat at the lower front point by the floor (one side at a time) and lift-once you release ...

Question about Mazda Protege

1 Answer

...in the gas tank is defective. Might have to drop the tank to replace it. Sometimes you can get to it by removing the back seat or through the trunk at the back seats. Not all cars have this

Question about Mazda Protege

1 Answer

used seats. new ones would be absurdly expensive. They are not too hard to get out as my brother removes his back seat every time he locks his keys in trunk of his Protege. The seats usually "hook" in

how do i remove the front seat on my 2002 mazda protege nothing There are 2 bolts in the front holding to the floor and 2 in the back

Question about Mazda Protege

1 Answer

...Remove your back seat. Disconect your fuel lines and electrical connections. unbolt the screws in the cover. get some rags so if you spill, it wont stay in your car.do not use a light bulb drop light ...

Question about Mazda Protege

3 Answers

...remove back seat in 1972 buick skylark Remove the seat cushion retaining bolts, detach the seat cushion and remove it up and out from the vehicle. Remove the rear seat back retaining bolts at the ...

...remove the back seat? HELP, 1994 FORD ESCORT BACK SEAT REMOVAl. I spilled gasoline on fabric back seat of 1994 ford escort, I can't get the back seat out. How do I remove the back seat? there ...

Question about Mazda Protege

1 Answer

...to Section 01-05 . Remove rear seat bolster mounting bolts. Remove bolster assembly. Remove four seat back to package tray retaining bolts. Remove seat back. To install, reverse Removal

Not finding what you are looking for?
1998 Mazda Protege Logo

363 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...