1996 Mazda MPV "plug wires" Questions

plug wires you might have one crossed. get a wiring diagram and check each wire from the cap to the plug , cyl 1 to cyl1 ect. it is very easy to cross one. make sure the wires are on the cap correctly

...procedure for the remaining two plugs on the front and the three plugs on the back of the engine. Remove and replace one plug at a time, to ensure that you don't mix up the wires. Best

...plug wires on a 2001 Mazda MPV. He took out all the plug wires without marking which plugs each wire went to. Do you know where I can find a diagram so I can rewire the plugs? Thanks! here it ...

...Take it to a mechanic and have them take a look at it. Im guessing its the distributor, Spark plug, or spark plug wire on cylinder 4 #4 cylinder could be faulty plug wire or plug or coil pack,I ...

sure that the Plug Wires are going to the right Plug. make sure you have a good contect with the Plug and Plug wire. make sure that the Plug wire is in the Cap and the Cap is on right and clamped down

...go with the spark plug first and then look at the condition of the wires. Hope this helps... My Mazda MPV 2000, has misfire on #5, changed plugs, wires, coil but still runs rough and lots of gas ...

where are the spark plug wires on a mazda 2003 mpv with a v-6 I can't fid the wires. there are no wires on this vehicle. i believe each spark plug has its own coil bolted on top of each plug

...plug wires it is in the corect firing order and still no spark. i know it is getting fuel. If the van was running before you changed the wires, I don't see how it is not firing the plugs now ...

...spark plug wires are firmly attached. If they are, then look at or replace your spark plugs. If you have a testor, see if all spark plug wires are working well. Could be worth checking HT lead as ...

...you have 1 bad spark plug you should replace them all same thing goes with the plug wire you can have the coil tested at the parts store i would replace the spark plugs and wires then go from