1994 Mazda Protege "6 timing marks 2" Questions

...6. Loose and lock the timing bearing at its farther position. Install a timing belt starting from the crankshaft gear, then right cam, then left cam, and at last the timing bearing. 7. Press and hold ...

...6. powersteering can be loosened as well, 7. once u remove the crank pulley..u can take the 10 mm blots out of the timing belt/water pump covers.u will also need to support the engine(under the oli ...

...6. Ensure timing marks aligned [2] & [3]. 7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt. Remove: Timing belt lower cover [7]. Crankshaft sprocket guide ...

6. Ensure timing marks aligned [6] . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9.

...6. Ensure timing marks aligned [6] . STEP 7. Apply a load of 2 kg to belt at .Belt should deflect 4-6 mm. If not Adjust position of tensioner pulley. STEP 8. Install components in reverse order of ...

...6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to ...

6) Tension Pulley 014RY00043 Legend (7) Alignment Mark on Oil Pump. (8) Alignment Mark on Timing Belt (9) Alignment Mark (notch) on Crankshaft Timing Pulley. (10) Alignment Mark (groove) on Crankshaft

6 here you go Fig. Align the timing mark on the crank sprocket (2) to the mark on the bottom of the timing chain damper (1) and the timing mark on the cam gear (4) to the mark on the top of the timing

...6, 8 and 10 degrees before TDC. Set timing 3 degrees BTDC (Before Top Dead Center). In addition, valve timingis set like this: Intake opens: 12 degrees BTDC Exhaust Closes: 8 degrees ATDC 15486372 is ...

timing lamp, but I don't know the right mark, it says 10 degrees BTDC. The pulley has 6 marks, which one is the right one? the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2