1994 Mazda MX-3 "mx3 transmission" Questions

...mx3 wont shift in high gear clutch plate worn causing slipping no increase in speed or transmission fluid low or transmission fluid old contaminated, transmission need fluid and filter change.could ...

...mx3 v6 the transmission dip is located under the hood and with a funnel you put the transmission fluid in and remember to keep checking while the engine is running warm because it does tend to expand ...

...transmission from a 93 mazda mx3? i need to replace the clutch in my car and dont know how to get the transmission out....do you need to remove the engine or can we drop the trany out the bottom of ...

...mx3 i changed cv joints and my gear oil leaked out of tranny.. i cant figure where or how to refill there should be a square divet one low and one high on the side of the transmission that you can ...

...mx3,,v6,,I need to find the plug in for the block heater,,can someone help The block heated pluggin is located directly below the head of the motor by the firewall, above the transmission. It's hard ...

...mx3 1.61 auto.The problem is the engine cuts out when the temperate gets high.I have had a new transmission fitted and still get the same fault.I have been advised that the radiator could be blocked ...

...mx3 precidia because my electrical light came on when it would not start. My research has said that the starter is connected to the bell housing on the manual transmission. My car manual shows the ...

mx3 have? The MX-3 came with three engine options: a 1.5 L I4 (only found in the Autozam AZ-3), a 1.6 L I4 and a 1.8 L V6. The 1.6 L was available in two versions, an 88 hp (66 kW) SOHC/16-valve B6-ME

mx3 the gear shift feels like it has come out of the manual transmission. it is very lose and well not shift with out forcing. There are wiring diagrams online that can explain the wiring that is in a

...fluid level? When was transmission last serviced? What year modle and milage? its a 92 mx3 w about 300 000 on it the fluid level is fine and when it engages it will drive fine also reverse works ...