1994 Mazda 323 "front end" Questions

end from the front wheel knuckle (3K186). Remove the ball joint bolt and the ball joint bolt nut. Carefully pry down on the front suspension lower arm (3078) to separate the front suspension lower arm

...steering / suspension component; bushing, tie rod end, ball joint, etc alignment issue You can rotate the tires, front to back to see if the problem follows the wheels or is a front end only

front right suspension spare part due to knocking sound. The stabilizer bushing is loose. Your car being 15 years old, your better of replacing the Sway bar end link. You can pick them up at Auto Zone

...front shocks, tires are warring on the outside and when turnning the wheel to the left or right at 50% turn stering goes full to ether side. camber out of adjustment u need a front end ...

...and some are press fitted. Any reputable front end alignment shop can replace these, but the cost for doing the job will be more expensive for the press fit ball joints. Hope this helps, let me

Front Speaker Negative Wire (-): Yellow/Red Left Rear Speaker Positive Wire (+): Orange Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Green/Black Right Rear Speaker

...front pads on a 1989 mazda 323 there are 2 long pins that go inside the end of the pads. that hold them in place, i can not get them out is there a special tool? i have tried vice grips etc nothing ...

front end seems to wander and the car does not seem to handle as well. Has the wheel alignment been altered or is it something more serious? could be you bent something , have the front end inspected,

BMW 320 D Ho to remove/fit flexible joint at front end of exhaust system most exhaus specialists are able to cut that part out and weld in a new flexible joint at a fraction of the dealers price

...front end alignment on a 2000 323. Could a local mechanic do this for me or is it of necessity an issue for a dealer? Gene This is a very simple procedure, any good tyre dealer can do this for