1993 Mazda MX-6 "throttle body" Questions

Ad

...not on highways) Spring on throttle body is not working. Or, throttle plates sticking, clean them. Or Accel cable sticking. Have someone push the pedal while you look for the problem under the

Ad

Question about Mazda MX-6

1 Answer

...throttle body there is a cable that runs to a metal thing that turns and that is your throttle cable. when you press the throttle it pulls the cable and makes the engine rev up. all you need to do is ...

Ad

Question about Mazda MX-6

1 Answer

...control acceleration doesn't come down...unless pedal pulled back Cable is bad or spring at carb or throttle body is broke, remember something is causinh butterfly at carb/throttlebody not to ...

...for fuel. it sounds like your filter it also may need an air filter and clean the throttle body out with some carb cleaner just remove the throttle body from the manifold and give it a good ...

...ll start up and sometimes I can crank the batt. dead Check the air intake tube that goes to the throttle body, Check for cracks or leaks, This can cause unmetered air to get by the mass air flow ...

Question about Mazda MX-6

1 Answer

...is an idle valve on the throttle body. it opens to keep a cold engine running, then closes when the engine warms up. if it sticks open, car will run good for a few seconds then stall the warmer it ...

...throttle body, if the egr valve is slightly open it will cause a vacuum leak that you wont be able to find, make sure its closed all the way, these can get coated with carbon and not close

...throttle body. Does it fit tight in the hole? You can seal loose fittings with a high-temp RTV (Red) silicone sealant/adhesive. Several small leaks add up and your engine, heat/AC, and transmission ...

...for. The thermostat is around $10 at any auto parts store you can have them help you find the right one. And the thermostat is located in the main radiator hose that connects to the throttle

...throttle body to air flow brand n ew and still the car wont idle Try this. This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault ...

Not finding what you are looking for?
1993 Mazda MX-6 Logo

174 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Mazda MX-6
1994 Mazda MX-6

87 Questions

1995 Mazda MX-6
1995 Mazda MX-6

81 Questions

1996 Mazda MX-6
1996 Mazda MX-6

59 Questions

1990 Mazda MX-6
1990 Mazda MX-6

40 Questions

1992 Mazda MX-6
1992 Mazda MX-6

20 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...