...radiator fan continues to run even after ignition switch is off. I pulled the fuse,but what do you think might be the problem? the fan is controlled by the A/C as well as engine,so it could be a ...
Question about Chrysler Cars & Trucks
...RADIATOR FAN RELY FUSE FOR 2006 2.4L 4 DOOR PT Cruiser CHRYSLER GAS ENGINES Radiator fan operation is controlled by the Total Integrated Power Module (TIPM) with inputs from the Powertrain Control ...
...radiator fan fuse? under hood fuse/relay box - #13 7.5 AMP fuse, controles Power mirrors, ABS system, Air delivery, Blower motor relay, Rear window defogger relay, Radiator fan relay, Condenser fan ...
...fuse for the radiator fan should be in one of those blocks if not in the radiator fan module itself. If the fan fails to run, you might check the control module to see if it is malfunctioning. The ...
Question about Mazda MX-3
...fuse. I would start with unplugging the radiator fan, and then possibly the ABS, then install a new fuse and see if it pops again. The cruise should only be able to blow it after you turn it on, so ...
months. Now fuse has blown twice and fans don't come on and have code 35 in system code 35-Radiator fan control relay circuit-open or short detected in the low speed radiator fan relay control circuit
...fuse's , three relays an a fan control unit ! 1. radiator fan main relay , located in underhood relay box A 2.condenser fan relay , located in underhood relay box A 3.radiator fan relay , located in ...
...radiator fan when it turns it on. Is the fan coming on or not? Usually not when you have this code. Problem can be with the fuse, relay, wiring or fan itself. First check the fuse. If good, next try ...
Question about Mazda MX-3
fuse is good, what's wrong? My radiator cooling fans have no power and the 40 amp fan fuse is good, what's wrong? There are many things that can cause your radiator fans to not get power.&
Question about Cars & Trucks
radiator fan relay turning on the fan . Check fuse in the under hood fuse box , If the fuse is blown you have a electrical short , too much current flow . Plus if the PCM sees too much pressure in the
164 questions posted
Usually answered in minutes!
138 Questions
88 Questions
72 Questions
6 Questions
3 Questions