1991 Mazda 323 "5 cooling system water" Questions

Ad

Question about Mazda 323

1 Answer

...5 minutes, the temperature guage moves up 3/4 of the way. The radiator also loses a lot of water and needs to be refilled after +- 10km drive. The car is particularly slow on the road. Pressure test ...

Ad

...cooling system. 2. Loosen the alterantor adjustment and remove the belt. 3. Remove the water pump pulley. 4. Remove all the timing belt covers. 5. Loosen the timing (camshaft) belt tensioner and slip ...

Ad

Question about Mazda 323

1 Answer

...5.0L Engine Drain the cooling system. CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in ...

Question about Mazda 323

2 Answers

SYSTEM and ENGINE IS COLD! RAN THIS TEST IN A WELL VENTILATED AREA ONLY! You will spill some coolant during this air pocket purge test.......BE KIND TO THE ENVIRONMENT and ANIMAL please clean up after

...Cooling System Operation - 2.0L/2.4L 1 - HEATER 2 - HEAT UP 3 - COOL DOWN 4 - PRESSURE CAP 5 - COOLANT OUTLET CONNECTOR 6 - WATER PUMP 7 - ENGINE 8 - COOLANT RECOVERY CONTAINER 9 - RADIATOR Fig. 2 - ...

Question about Mazda 323

1 Answer

...thentightening the pulley bolts. 5. Tighten the bolts to 25 Nm (18 inch lbs.). 6. Install the drive beltguard. 7. Fill the cooling system. 8. Inspect the cooling system for leaks. Regards, ...

...5.Fill the engine cooling system with a 50/50 mixture of Premium Engine Coolant E2FZ-19549-AA (green), (in Oregon, F5FZ-19549-CC, in Canada, Motorcraft CXC-10), or Ford Extended Life Engine Coolant ...

Question about Mazda 323

1 Answer

...cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley ...

Question about Mazda 323

1 Answer

...cooling system from the radiator into the pan. 2. Disconnect the negative battery cable. 3. Remove the accessory drive belt guide and the accessory drive belt. 4. Loosen the water pump pulley bolts ...

...Cooling System capacity is 2 1/4 gallons. The mixture should be 50% (1 5/8 gallons) full strength antifreeze and 50% water. Good Day!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly ...

Not finding what you are looking for?
1991 Mazda 323 Logo

183 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Mazda 323
1994 Mazda 323

368 Questions

1993 Mazda 323
1993 Mazda 323

85 Questions

1992 Mazda 323
1992 Mazda 323

70 Questions

1990 Mazda 323
1990 Mazda 323

61 Questions

2003 Mazda 323
2003 Mazda 323

23 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...